Evaluating burned framing
Not all charred wood has to be replaced. Fire burns the outer layer of lumber, and the char can protect the wood underneath. The question is how much sound wood remains.
| Condition | Typical approach |
|---|---|
| Smoke-stained, no char | Clean and seal |
| Light surface char | Remove char (scraping, sanding or blasting), clean and seal |
| Deeper char reducing the member size | Sister new lumber alongside or replace |
| Burned through, sagging or cracked | Replace; engineer may specify |
Engineered lumber, like I-joists and trusses, can lose strength quickly in a fire and is often replaced rather than repaired. A structural engineer may be needed for beams, trusses, load-bearing walls and roof structures.
What gets rebuilt
- Roof framing, decking and roofing in burned areas
- Wall framing, sheathing, insulation and drywall
- Floor joists and subfloor
- Electrical wiring in the fire area, by a licensed electrician
- Plumbing and HVAC components damaged by heat
- Windows, doors, trim and finishes
Permits and inspections
Structural repairs in the City of Dallas require building permits and inspections. Highland Park and University Park have their own permit offices. Your contractor should pull permits; ask to see them. Unpermitted structural work can cause problems with insurance, resale and safety.
Sealing before rebuild
Before walls are closed up, cleaned framing near the fire is usually sealed with an odor-blocking primer. Skip this step and smoke odor can return through new drywall. See smoke odor removal.
Code upgrades
Rebuilding can trigger current building code requirements, such as smoke alarms, electrical updates or energy code items. Many homeowners policies include limited ordinance or law coverage for these upgrades; check yours.
Structural repair follows cleanup and assessment; see fire damage assessment. For the whole project, see complete fire and smoke restoration, or call (972) 544-0840.