What these treatments are
| Product type | Typical use | What it does |
|---|---|---|
| Antimicrobial cleaner or disinfectant | After Category 2 or 3 water, during cleaning | Reduces microbes on cleaned surfaces |
| Mold-resistant encapsulating coating | On cleaned framing, attic decking, crawl space wood | Seals the surface and contains residual stain; slows regrowth on the coated surface |
| Mold-resistant primer or paint | Bathrooms, laundry rooms, rebuilt walls | Slows surface growth on paint film |
| Fogging | Sometimes after remediation or odor work | Distributes product in the air; does not replace physical cleaning |
When a treatment makes sense
- After cleaning framing in a remediation project, before walls are closed
- On attic decking or crawl space framing after cleaning
- After drying a Category 2 or 3 water loss
- In rebuilt bathrooms and laundry rooms with a history of moisture
When it is wasted money
- Spraying over active growth. Mold under a coating is still there.
- Treating instead of drying. If materials stay wet, mold returns.
- Whole-house "preventive" fogging with no water problem or growth
- Repeated treatments to cover up a leak nobody has found
Questions to ask before you pay for it
- What product is it, and is it registered or labeled for this use?
- Will surfaces be cleaned first?
- Is it safe for occupants and pets, and how long before re-entry?
- What moisture problem is being fixed at the same time?
- Is it part of the assessor's protocol on a licensed job?
Real prevention is moisture control
No coating beats a dry house. The basics are on our moisture control and mold prevention page: fast drying after leaks, humidity control, ventilation and drainage.
Treatment is the last step of good mold remediation, not the first. Call (972) 544-0840 for help.