Where mold grows in an AC system
- Evaporator coil: wet every time the system cools, and it catches dust that feeds growth
- Primary drain pan: standing water from a slow or clogged drain
- Blower wheel and housing: moist air passes through constantly
- Cabinet insulation inside the air handler
- Supply registers that sweat in humid weather
Signs your HVAC has mold
- A musty or dirty-sock smell when the AC kicks on
- Visible growth on registers or the air handler
- Water around the air handler or a full secondary pan
- Allergy symptoms that worsen with the AC running
What the cleaning involves
- Shut down the system and set containment around the air handler.
- Clean the evaporator coil with an appropriate coil cleaner.
- Clean and treat the drain pan, or replace it if rusted.
- Clear and flush the condensate line; add a float switch if missing.
- Remove and clean the blower wheel and housing.
- Replace moldy internal insulation and the filter.
This work is usually done by a qualified HVAC company or a remediation company working with one. Chemicals used inside HVAC systems should be appropriate for that use.
Why Dallas systems are prone to it
- Long cooling seasons with the system running for hours every day
- Attic air handlers in extreme heat
- Oversized units that short-cycle and do not dehumidify well
- Condensate lines that clog with algae in summer
Coil versus ducts
Cleaning the air handler does not clean the ducts, and cleaning ducts does not clean the coil. If mold is in the ductwork too, see air duct mold removal.
If an AC overflow already soaked a ceiling, see ceiling water damage repair. For mold problems, call (972) 544-0840 or read about mold remediation in Dallas.