Phone line open 24/7 for Dallas water emergencies📍 Serving Dallas TX & Surrounding Areas · (972) 544-0840
Dallas Pro Water Restoration
Mold inspection · Hidden mold

Mold Inspection in Dallas

A mold inspection is detective work: follow the smell and the moisture until you find what is growing and why.

Short answerA mold inspection is a visual and moisture-based search for mold growth and the conditions causing it. It uses moisture meters, thermal imaging, a humidity check and sometimes inspection holes. In Texas, a formal mold assessment, including sampling and a remediation protocol, must be done by a TDLR-licensed Mold Assessment Consultant.

When to get a mold inspection

  • A musty or earthy smell you cannot trace
  • Stains, bubbling paint or warped trim with no obvious source
  • After a leak that went unnoticed for a while
  • Allergy or asthma symptoms that improve when you leave the house
  • Before buying or leasing a property with past water damage
  • After a flood or storm, before rebuilding

What an inspector checks

AreaWhy
Bathrooms and kitchensShower pans, supply lines, dishwasher and sink leaks
AtticRoof leaks, AC drain pans, bath fans venting into the attic
HVAC systemAir handler, coil, drain pan and supply registers sweating in humid weather
Exterior walls and windowsWind-driven rain and flashing leaks
Floors and baseboardsSlab leaks and old water events
Crawl spaceStanding water and humidity under pier-and-beam homes

Tools used

  • Moisture meters to find wet materials, the root of any mold problem
  • Thermal imaging to spot cool, damp areas inside walls and ceilings
  • Hygrometers to measure indoor humidity
  • Borescopes to look inside a wall cavity through a small hole

Inspection, testing and assessment are not the same thing

  • Inspection looks for growth and moisture. It answers "is there a problem, and where?"
  • Mold testing takes air or surface samples for a lab. It answers "what is it, and how much?"
  • Mold assessment is the Texas-licensed service that combines inspection and sampling and writes the remediation protocol a licensed remediator must follow.

For a small, obvious problem, an inspection may be all you need. For anything a licensed remediator will fix, the assessment is the formal step.

Why independence matters

Texas does not allow the same company to do the assessment and the remediation on the same project. That keeps the company that profits from the removal from also deciding how much removal you need. When we connect you, inspection or assessment comes from a different licensed company than the one that will do the work.

Texas licensing noteMold work in Texas is licensed by TDLR. A licensed Mold Assessment Consultant and a licensed Mold Remediation Contractor cannot be the same company on the same project. Ask any company for its TDLR license number and check it on the TDLR website.

Moisture is always the starting point. If the inspection finds an active leak, see water damage inspection and mitigation. To arrange an inspection, call (972) 544-0840.

FAQ

Mold Inspection: common questions

How long does a mold inspection take?

A typical home inspection takes one to a few hours depending on size, access to the attic and crawl space, and whether samples are taken.

Can a home inspector do a mold inspection in Texas?

A general home inspector may note visible mold or moisture, but formal mold assessment in Texas must be performed by a TDLR-licensed Mold Assessment Consultant.

Will an inspection find mold inside my walls?

Often it can find the moisture that feeds it, using meters and thermal imaging. Confirming growth inside a cavity may need a small inspection hole or a borescope.

Water still spreading? Get a Dallas restoration crew moving.

One call connects you with an independent local company that handles extraction, drying and repairs. The line is open around the clock.

Call (972) 544-0840
Call Now for 24/7 Help