Phone line open 24/7 for Dallas water emergencies馃搷 Serving Dallas TX & Surrounding Areas 路 (972) 544-0840
Dallas Pro Water Restoration
Fire damage 路 Smoke 路 Soot 路 Board-up

Fire and Smoke Damage Restoration in Dallas

After the fire trucks leave, a house usually has three problems at once: fire damage, smoke and soot in every room, and a lot of water from putting the fire out.

Short answerFire and smoke damage restoration covers securing the property, removing water used in firefighting, cleaning soot from surfaces and contents, neutralizing smoke odor, and rebuilding burned areas. Water removal and board-up come first, usually the same day.

The first 48 hours after a house fire

Secure the property, get the water out, and stop soot from setting into surfaces. Fire damage gets worse after the fire is out: water from the hoses soaks into the house, acidic soot etches metal, glass and grout, and an open roof or broken window invites rain and theft.

  1. Wait for the all-clear. Do not go back in until Dallas Fire-Rescue or the fire marshal releases the property.
  2. Utilities. Do not turn power, gas or HVAC back on until Oncor, Atmos Energy or a licensed electrician says it is safe.
  3. Call your insurer and get a claim number. Ask about additional living expense coverage if you cannot stay in the home.
  4. Board-up and tarp. Openings in walls, windows and roof are covered the same day to keep weather and people out.
  5. Water removal. Firefighting water is extracted and drying starts, just as with any other water extraction job.
  6. Document. Photograph every room before cleanup starts. Make a contents list as you go.

Water damage after firefighting

People are surprised by how wet a house is after a fire. Hose lines put a lot of water into walls, ceilings and floors, and it runs to the floor below and into rooms the fire never touched. Treat it like any other water loss: extraction, moisture mapping, drying and verification. Left alone for a few days, it adds mold to a fire claim. Our water mitigation and structural drying page explains how drying is measured.

Types of smoke and soot, and why they clean differently

ResidueTypical sourceWhat it is like
Dry smokeFast, hot fires burning paper and woodPowdery, easier to remove, but gets into cracks
Wet smokeSlow, smoldering fires with plastics and rubberSticky, smeary, strong odor
Protein residueKitchen fires, burned foodNearly invisible film, very strong odor, discolors paint
Fuel or oil sootFurnace puffbacks, oil-based firesDense, greasy, hard to clean

Wiping soot with a damp rag is the most common mistake. It smears oily residue into paint and grout. Crews usually start with dry chemical sponges and HEPA vacuums, then move to the right cleaner for the residue.

Kitchen fires and electrical fires

Kitchen fires are the most common house fires. Even a small stovetop fire coats the kitchen, and often the whole house through the HVAC, in protein residue you can smell long after it looks clean. Cabinets, the range hood, ceiling and ductwork usually need cleaning.

Electrical fires often start inside walls or in the attic. Even when the visible damage is small, wiring in the area must be inspected by a licensed electrician before the power goes back on. Burned wiring is replaced, not cleaned.

Smoke odor removal

Smoke odor removal works only after cleaning. The sequence is:

  1. Remove burned and charred materials. Odor lives in them.
  2. Clean soot from every surface, including inside cabinets, closets and light fixtures.
  3. Clean or replace HVAC filters and get ductwork cleaned so the system does not recirculate odor.
  4. Deodorize with methods matched to the job: thermal fogging, hydroxyl generators that can run in occupied spaces, or ozone treatment in unoccupied spaces only.
  5. Seal surfaces that still hold odor, like framing in the burn area, with an odor-sealing primer before rebuilding.

The IICRC standard for this work is S700. Ask the provider how it will verify odor is gone before walls are closed.

Contents cleaning and pack-out

Furniture, clothing, electronics, documents and keepsakes are often packed out, cleaned off-site and stored until the house is ready. A good pack-out includes an inventory with photos, which doubles as your contents list for the claim. Upholstery and carpet with smoke odor can often be cleaned; items that burned or melted cannot.

Structural fire damage repair

Charred framing is evaluated and either cleaned and sealed or replaced. Roof sections, drywall, insulation, wiring, plumbing and HVAC in the burn area are typically rebuilt. Rebuilds in Dallas need City of Dallas building permits; Highland Park and University Park have their own permit offices. Your provider or general contractor should pull permits, not you.

Fire claims in Texas: a few things to know

  • Additional living expenses. Most homeowners policies pay reasonable extra costs to live elsewhere while the home is repaired. Keep receipts.
  • Your deductible is yours. Texas law bars contractors from waiving or absorbing it.
  • Contractors cannot adjust your claim. If you want someone negotiating for you, hire a licensed public adjuster.
  • Do not throw out damaged items before the adjuster has seen them or you have photographed them.

Fire, smoke and water damage often show up together. For the water side of a loss, see our guide to water damage restoration in Dallas, TX. If the fire or the water used to fight it led to mold, see mold remediation. Big homes with lots of finishes and contents, like those in Preston Hollow, benefit most from a careful pack-out.

When the fire department releases the property, call (972) 544-0840 for board-up, water removal and smoke cleanup.

All fire and smoke services we connect callers with

Each of these has its own page with Dallas-specific detail:

FAQ

Fire and smoke damage questions

When can I go back into my house after a fire?

Only after Dallas Fire-Rescue or the fire marshal releases the property and utilities are confirmed safe. Structural damage, electrical damage and gas lines are real hazards. Do not turn on power or HVAC until an electrician or the utility says it is safe.

Why is my house wet after a fire?

Firefighting puts a lot of water into a house, and it soaks into walls, ceilings and floors around the fire area and below it. That water needs extraction and drying fast, the same as any other water loss, or mold becomes the next problem.

Can smoke smell really be removed?

Usually yes, but cleaning comes first. Odor removal works after soot is cleaned off surfaces and burned materials are removed. Methods include thermal fogging, hydroxyl generators and ozone treatment in unoccupied spaces. Painting over smoke residue without sealing it traps the odor.

Should I wipe soot off my walls?

Not before an expert looks at it. Wiping oily or wet soot smears it deeper into paint and grout. Dry soot often comes off with specialized dry sponges first. Ask the provider what type of residue you have before cleaning anything.

Does insurance pay for a hotel after a fire?

Most Texas homeowners policies include additional living expense coverage, often called Coverage D or loss of use, which pays reasonable extra costs to live elsewhere while the home is repaired. Keep every receipt.

Water still spreading? Get a Dallas restoration crew moving.

One call connects you with an independent local company that handles extraction, drying and repairs. The line is open around the clock.

Call (972) 544-0840
Call Now for 24/7 Help