Phone line open 24/7 for Dallas water emergencies馃搷 Serving Dallas TX & Surrounding Areas 路 (972) 544-0840
Dallas Pro Water Restoration
Showers 路 Grout 路 Toilets 路 Vanities

Bathroom Mold Removal in Dallas

Every bathroom grows a little mold. The question is whether it is on the surface, where you can clean it, or behind the tile, where you cannot.

Short answerBathroom mold removal ranges from cleaning surface mold on grout, caulk and painted surfaces to removing tile, backer board and drywall when a leaking shower pan, valve or toilet has fed mold inside the wall. The fix always includes ventilation and stopping the leak.

Surface mold versus hidden mold

Surface mold (usually DIY)Hidden mold (call a pro)
Black spots on grout lines and caulkGrout or tile cracking, loose tiles
Spots on the ceiling above the showerStains or soft drywall on the other side of the shower wall
Mold on a shower curtain or bath matMusty smell that does not go away after cleaning
Comes back slowly over weeksFloor soft near the toilet or tub

Cleaning surface bathroom mold

  1. Run the exhaust fan and open the door.
  2. Scrub grout and tile with a bathroom cleaner or detergent and a stiff brush.
  3. Cut out and replace caulk with mold growing underneath it; cleaning rarely gets it all.
  4. Dry the area completely.
  5. Re-seal grout once it is clean and dry.

Wear gloves and eye protection, and never mix bleach with ammonia-based or acidic cleaners.

Common hidden leak sources

  • Failed shower pans in tiled showers, which leak into the subfloor and adjoining walls
  • Shower valve and supply leaks inside the wall
  • Toilet wax ring failures leaking into the subfloor, often first seen as a ceiling stain below
  • Tub drain leaks on second floors
  • Vanity supply lines dripping inside the cabinet

When the leak is inside the wall, the tile, backer board and drywall usually come out, the framing is cleaned and dried, and the shower is rebuilt with proper waterproofing. Water side of that job: toilet overflow cleanup and wall water damage repair.

Ventilation: the fix most bathrooms need

  • Run the exhaust fan during showers and for 20 to 30 minutes after.
  • Make sure the fan vents outdoors. Many Dallas homes have bath fans venting into the attic, which feeds attic mold.
  • Check that the fan actually moves air: a tissue should hold against the grille.
  • Consider a humidity-sensing fan or a timer switch.

Ceiling mold above the shower

Small spots on a painted ceiling are usually condensation. Clean, dry and repaint with a bathroom-grade paint, and improve ventilation. If the ceiling is stained from above or soft, there may be a leak or roof issue; see ceiling mold removal.

Texas licensing noteMold work in Texas is licensed by TDLR. A licensed Mold Assessment Consultant and a licensed Mold Remediation Contractor cannot be the same company on the same project. Ask any company for its TDLR license number and check it on the TDLR website.

If you suspect mold behind the tile, call (972) 544-0840. For the full licensed process, see mold remediation.

FAQ

Bathroom Mold Removal: common questions

Why does mold keep coming back in my shower?

Usually poor ventilation, caulk with mold underneath, or a hidden leak. Replacing caulk, running the exhaust fan longer and checking for leaks usually stops it.

Is bathroom mold dangerous?

Small amounts on grout are common and mostly a cleaning issue. Larger growth, or mold inside walls, can affect people with allergies or asthma and should be removed properly.

Do I need to remove tile to get rid of mold?

Only if the mold is behind the tile from a leak. Surface mold on grout does not require removing tile.

Water still spreading? Get a Dallas restoration crew moving.

One call connects you with an independent local company that handles extraction, drying and repairs. The line is open around the clock.

Call (972) 544-0840
Call Now for 24/7 Help