Why Dallas attics get mold
- Bath and kitchen fans venting into the attic instead of outdoors, dumping warm, wet air onto cooler roof decking
- Roof leaks after hail and wind, or at flashing and vents
- AC equipment in the attic: sweating ducts, overflowing condensate pans, and air handlers in hot, humid air
- Water heaters leaking in the attic
- Poor ventilation: blocked soffit vents or too little exhaust venting
- Winter condensation on the underside of the roof deck during cold snaps
Signs of attic mold
- Dark staining on the underside of roof decking, often in a pattern near vents or fans
- Musty smell in upstairs rooms or when the attic hatch opens
- Wet or matted insulation
- Rusty nails poking through the deck
- Frost or droplets on the decking on cold mornings
How attic mold is remediated
- Fix the source. Re-route bath fans to the exterior, repair the roof, fix AC drains and duct insulation, improve ventilation.
- Containment at the attic access to protect the living space.
- Remove contaminated insulation in affected areas by vacuum.
- Clean decking and rafters by HEPA vacuuming and wiping, sanding or abrasive blasting, depending on the extent. Heavily damaged decking is replaced.
- Apply a coating where appropriate, after cleaning, not instead of it. See mold prevention treatment.
- Re-insulate once everything is dry.
Attic staining that is not active mold
Old water stains, wood discoloration and dirt can look like mold. Old, dry growth from a problem that was fixed years ago may only need cleaning, not a full project. An inspection with moisture readings tells the difference; see mold inspection.
Working in a Dallas attic
Summer attic temperatures can be dangerous. Reputable crews schedule attic work early in the day, take breaks and use cooling. Attic work also means protecting ceilings below from foot traffic and checking for wiring hazards.
Roof leak still active? Start with roof leak water damage repair. For mold, call (972) 544-0840 or see the full mold remediation process.