Two kinds of ceiling mold
| Moisture from below | Moisture from above |
|---|---|
| Small spots, often in bathrooms, laundry rooms or kitchens | Spots inside a water stain ring |
| Spread evenly across the surface | Concentrated in one area, sometimes with sagging |
| Cause: steam and poor ventilation | Cause: roof leak, attic AC overflow, water heater, plumbing, unit above |
| Fix: clean, ventilate, repaint | Fix: stop the leak, remove affected drywall and insulation, rebuild |
Cleaning small surface spots
For condensation spots on a painted ceiling: wear eye protection and an N95, wipe with detergent solution, dry, and once dry, prime with a stain-blocking primer and repaint. Improve ventilation or the spots return. See bathroom mold removal for exhaust fan tips.
Removing mold from a leak above
- Stop the source. See ceiling water damage repair and roof leak repair.
- Set containment below the area, with plastic and negative air. Overhead work drops debris and spores.
- Remove moldy drywall and the wet insulation above it, often from the attic side too.
- Clean joists and the attic side as needed; see attic mold remediation.
- Dry, verify, then hang new drywall, texture and paint.
Popcorn ceilings and older homes
Acoustic ceiling texture in homes built before the 1980s may contain asbestos. Before scraping or cutting an older popcorn ceiling, get it tested. Disturbing asbestos is a separate hazard with its own rules.
Condos and apartments
Ceiling mold in a unit below another unit usually points to a leak upstairs: a toilet, shower pan, washer or HVAC drain. Notify management and the HOA in writing and ask for access to the unit above. See Uptown and Downtown condo guidance.
Call (972) 544-0840 if your ceiling is stained, soft or growing mold. The licensed process is on the mold remediation page.