Why below-grade rooms grow mold
Basements are cooler than the rest of the house, sit against damp soil, and have little air movement. In Dallas, humid outdoor air that leaks into a cool basement can reach its dew point and condense on walls and floors. Add a past flood, a cracked wall or a leaky water heater and mold follows.
Dallas basements are usually found in older and custom homes, storm shelters and wine rooms added later, and commercial buildings. Many were built without the drainage and waterproofing common in colder states.
Where to look
- Behind finished drywall and paneling on exterior walls
- Under carpet laid directly on concrete
- On the underside of stairs and on wood framing near the floor
- Around water heaters, HVAC equipment and floor drains
- On stored cardboard boxes, books and fabric
The removal process
- Find the water. Seepage, condensation, plumbing or past flooding. See basement flood cleanup if there was standing water.
- Containment so spores do not travel upstairs, often through the HVAC.
- Remove moldy drywall, insulation, carpet, pad and stored porous items.
- Clean concrete and framing with HEPA vacuums and detergent; heavily damaged wood is replaced.
- Dry with dehumidifiers until concrete and framing read normal.
- Clearance for licensed projects.
Keeping a basement dry afterward
- A dedicated dehumidifier set to keep relative humidity below about 50 to 60 percent, in line with EPA guidance
- Gutters and downspouts directing water well away from the foundation
- Grading that slopes away from the house
- Sealing visible cracks, and a sump pump with battery backup where water collects
- Mold-resistant materials when refinishing, and leaving a gap between flooring and concrete where appropriate
- Plastic bins instead of cardboard for storage
See moisture control and mold prevention for more.
Below-grade jobs often touch HVAC and structural issues, so tell the operator it is a basement when you call (972) 544-0840. For the full licensed process, see mold remediation in Dallas.